| Gallery, Projects and General > Project Logs |
| i've been inspired!! |
| (1/1) |
| jim:
having read a few of the topics on here i've been inspired to get back on track!! i used to make all my own kit, but of late i've bought quite a lot of stuff i could have made, some of which i've had to improve/re make! ive got some kit i made 27 years ago and it still works as good as the day it was made :bugeye: i'm making a tapping guide this weekend, simple design and just what i need (i have an inability to tap a straight hole :() i'll post pics when i've done, good or bad and successful or not :doh: |
| raynerd:
Look forward to it ... please post plenty of pics because :worthless: I`m going to need to make one after the rest of the jobs on my list! Chris |
| shoey51:
:worthless: Lots of pics please I made a small tapping guide after bending and breaking a 10ba tap found the design in a book I have :D |
| jim:
--- Quote from: shoey51 on September 03, 2009, 03:46:24 PM --- :worthless: Lots of pics please I made a small tapping guide after bending and breaking a 10ba tap found the design in a book I have :D --- End quote --- i've "designed" something to fit in a drill chuck so the tap follows the hole perfectly, i'll be able to use it in both the lathe and the mill. thems brave words :) |
| Navigation |
| Message Index |