Gallery, Projects and General > Gallery

Foot pegs...

(1/2) > >>

ProficientBumbler:
I have had my lathe since about March & done a little playing around with it to get a bit of practice. I am still very inexperienced & have little tooling but I certainly enjoy playing/learning.
Anyway I made some foot pegs for my neighbors motorcycle & thought I would share. He gave me free reign so I had him get some aluminum & some led lights & I went to work. He was very excited with the outcome, so I guess I am as well!
Basiclly I turned down the pegs & put some grooves in it. Then I bored out the center to accept the led lights & wiring. I capped the ends with some blue plastic circles I cut from an extra parts bin I had laying around. There are actually three seperate sized bores in the center getting increasingly larger in diameter as the extend from the back to the front. This way as I slid the light in from the front the light bottomed out at the small diameter where the wire goes so it cannot slide backward. Then the lens cap bottoms out at the end of the light so it cannot go backwards either. Probably made that clear as mud! Sorry!
Anyway I know my abilities are limited compared to what I have seen on this site, but we all have to learn at the beginning. I just wanted to contribute as I really enjoy this site & have learned a lot of useful information.
Btw, some of the pics make the pegs look sort of distorted but it is just the camera phone I was using.

Baldrocker:
Hey! Congratulations a practical use for your machine :clap:
Look great too.
Your on your way.
BR

chuck foster:
i like the creative use of the led's  :thumbup: , now you might have to make more for your neighbors biker friends.............ahh the work will never end  :D

chuck :wave:

sbwhart:
Hi

Nice job.  :thumbup: and write up

Great idea adding the lights to the rests.

Have fun

Stew

Stilldrillin:
Very nicely done Brian!  :clap:

You`ll develop/ progress from here, when your other neighbours & friends discover your talents.....  :D

David D

Navigation

[0] Message Index

[#] Next page