Gallery, Projects and General > How to's
Lathe chuck backstop for dummies
Gerhard Olivier:
Final parts done
Thanks for comments
Made the Knurled locking nut
And then assembled the lot -wont tighten as it just slips. :(
Need something to stop rotation. :smart:
So I tapped a m6 tread in the outer sleeve and a 2mm groove in the inner.Then I cut a m6 allen bolt down to lenght and lathed a 2mm end.
This all assmbled well and stopped the rotation.
The whole lot together
And relative to the headstock lenght the delrin spacer is just to keep things concentric but i dont think it is essential.
And fitted to the lathe -
Next I need a Saddle stop.
Gerhard
bogstandard:
That really is a nice job you have done there Geroli.
I will have to get one made for mine now, as I can definitely see the advantage of one of these for longer stock turning, just as John Hill suggested.
Bogs
arnoldb:
Good job Gerhard :thumbup: :clap:
:beer: Arnold
Navigation
[0] Message Index
[*] Previous page
Go to full version