Gallery, Projects and General > How do I??

Producing multiples

<< < (2/2)

Gerhard Olivier:
Thanks for replies

Peter I think Im going to make a chuck back stop for the threaded ends as they are the same on two ends effectively making the 8 pieces 16 repeat operations.  But I like your Idea for cutting the blanks repeating the cuts with the parting tool at same distance from chuck every time.

Jonny sorry but i have not got any idea what a "broom stale" is.  Maybe missing something?? :(

Will put the back stop in separate post

Thanks
Gerhard

Jonny:
Geroli, what attaches to a domestic broom enabling you to sweep the floor and machines.
Just feed it through the headstock.

Also if any of you have an indexable carriage stop, one of the positions could be set up in conjunction with something on the tool post = All come off the same. Been meaning to make one for 9 years beats paying £75 second hand.

Gerhard Olivier:
Got it Jommy

Funny the answer I came up with looks a bit like a BROOM and works exactly like u explained


Thanks for explaining.
Gerhard

Navigation

[0] Message Index

[*] Previous page