The Shop > Tools

X3 - how much space needed

(1/1)

28ten:
A question for those of you that have an X3. As I suggested in my workshop thread I am building a new bench and I may mount the X3 on it haw much space do I need in terms of depth and width to accommodate and operate it? the depth is stated as 670mm but will i need more than this? the width is stated as 765mm so I'm guessing that I will need to double this for operating clearance.
If you feel like taking pictures of your set up even better  :D :D

sbwhart:
Hi

If you follow this link it'll take you to my thread, with pics.

http://madmodder.net/index.php?topic=691.0

Cheers

Stew

28ten:

--- Quote from: sbwhart on August 19, 2009, 04:06:31 PM ---Hi

If you follow this link it'll take you to my thread, with pics.

http://madmodder.net/index.php?topic=691.0

Cheers

Stew

--- End quote ---
Thaks useful thanks, would you recomend the stand? I was trying to save a little cash and not use one :D

sbwhart:
Hi

The stand I got with my mill is very well made far better than the stand that came with my lathe, its got adjustable feet so leveling up was a dodle, you end up with a very stable set up, I'm very pleased with it.

If you go with a self build aim for something that is as equally robust and you will have a very nice machine, I'm very happy with mine, I will be fitting a DRO and a power feed in a few months and will post a thread.


Have fun

Stew

Navigation

[0] Message Index