The Shop > Our Shop

My cellar

<< < (4/7) > >>

John Stevenson:

--- Quote from: 28ten on August 21, 2009, 02:18:43 PM ---
if I banged on the ceilingi would probably get a plant pot on my head :hammer:

--- End quote ---

Wot a WHOLE plant pot all to yourself ? Wow that's class.

John S.

28ten:

--- Quote from: John Stevenson on August 21, 2009, 02:39:38 PM ---
--- Quote from: 28ten on August 21, 2009, 02:18:43 PM ---
if I banged on the ceilingi would probably get a plant pot on my head :hammer:

--- End quote ---

Wot a WHOLE plant pot all to yourself ? Wow that's class.

John S.

--- End quote ---
well, i'm worth it  :) :)

CrewCab:
Blimey, your own plant pot ........... that's posh then  :bow:

CC  ::)

28ten:
If we were really posh it would be a ming vase  :lol: :lol:

28ten:
I have been busy the last couple of days making a new bench which is almost like making a kitchen (lucky I have fitted a few :D)
First the lathe was moved off the old bench onto a tool box so that I didn't have to lift it

The old bench will be recycled for a grinder

Some woodworking toys  


I started by doing the akward corner

And worked my way along

jumping ahead the work surface is loosely fitted and I am trying out machine locations

The drill press was moved to the position in the previous photo, the cupboard will go leaving enough space for a mill


At this stage the legs are only temporary something more sturdy will be fitted, and I shall be screwing some MDF between the frame and the surface to give it a bit of extra mass. I will be fitting cupboards underneath and more shelves once locations are finalised
one last picture  :doh: I wanted to slide the toolchest under the bench, but I neglected to allow for the depth of the frame  :bang: :bang:


I can't make it any higher as the bench is at the most comfortable height for me, ah well

Navigation

[0] Message Index

[#] Next page

[*] Previous page