The Breakroom > The Water Cooler
3D CAD
NickG:
Am sure it will Tim, you'll be designing your own engines next! I quite enjoy doing these simple little engines, it's satisfying to see them go from concept to a set of drawings and a working engine that actually resembles the drawing!
However, another part of me just thinks, don't re-invent the wheel and just use somebody elses design because time spent on the computer could be time in the workshop!
Bit of a trade off I suppose!
Nick
28ten:
--- Quote from: NickG on August 25, 2009, 03:58:50 AM --- time spent on the computer could be time in the workshop!
Bit of a trade off I suppose!
Nick
--- End quote ---
that is a very valid point, I find I spend too much time faffing about with drawings when I could just have knocked up the part with a sketch :bang:
Divided he ad:
--- Quote ---I find I spend too much time faffing about with drawings when I could just have knocked up the part with a sketch
--- End quote ---
Enter Boggo industries C-o-C version 2.8 :lol:
It's been around for many years and seems to work just fine :thumbup:
:)
Ralph.
NickG:
That is so true. I've used C-o-C plenty of times before but it's just nice to have a proper record of what you've done sometimes and have the facility to assemble things virtually in 3D before you do it for real!
Nick
Navigation
[0] Message Index
[*] Previous page
Go to full version