Gallery, Projects and General > Project Logs

Warco 918 Tumbler reverse

<< < (3/3)

John Hill:
I am impressed! :thumbup:

Straight up and straight down for the lever positions looks fine to my eyes and I think I would have designed it that way myself as that would give maximum travel of the lever and the best 'feel' for when making the selection, just my opinion.  Furthermore I expect having the 180 degree travel means the shifter is effectively locked in position by the eccentric?

mickn:
Nice work!
Makes a nice little machine a nicer little machine! well done



      Mick

Gerhard Olivier:
Thanks

John you got it in one I made the eccentric larger and that made the travel smaller about 40-45 degrees but then the spring lock had to take all the force and there was a small amount of movement/vibration on the selector when running. 

So back to straight up and down.

To the people contemplating this mod - not difficult and it makes a big noise differance- even if you dont plan any LH threads.  Most of you would be able to make it in a day.

Gerhard

John Hill:
Gerhard,  :thumbup:

Navigation

[0] Message Index

[*] Previous page