The Shop > Tools
Sieg X1
bogstandard:
If you know exactly what you need machining, and you have enough time when you bring your main casting, it would be no problem to drop it onto the mill to machine it for you.
Bogs
28ten:
Bogs
this is what I want to do http://warhammer.mcc.virginia.edu/ty/7x10/xslidemod.html to remove the material on the cross slide. I will then have enough travel to make the tapered gibs. it's not desperate I can live without tapered gibs for the time being :D
even better news, I explained the story of the x1 and Mrs 28ten says I can have an X3 later this year :jaw: :beer: I even told her that I would have to strip it down in the kitchen to get it downstairs!
bogstandard:
Print it out and bring the bits with you, if we have enough time, I'll hack away at it.
Bogs
sbwhart:
--- Quote from: 28ten on August 04, 2009, 05:30:07 PM ---
even better news, I explained the story of the x1 and Mrs 28ten says I can have an X3 later this year :jaw: :beer: I even told her that I would have to strip it down in the kitchen to get it downstairs!
--- End quote ---
Hi 28ten
I got a sieg X3 early this year very pleased with it strip down and assy to move is no problem.
this is my thread http://madmodder.net/index.php?topic=691.0
Have fun
Stew
28ten:
--- Quote from: sbwhart on August 05, 2009, 01:33:02 AM ---
--- Quote from: 28ten on August 04, 2009, 05:30:07 PM ---
even better news, I explained the story of the x1 and Mrs 28ten says I can have an X3 later this year :jaw: :beer: I even told her that I would have to strip it down in the kitchen to get it downstairs!
--- End quote ---
Hi 28ten
I got a sieg X3 early this year very pleased with it strip down and assy to move is no problem.
this is my thread http://madmodder.net/index.php?topic=691.0
Have fun
Stew
--- End quote ---
Once it is stripped will i be able to move it on my own?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version