Home Base > Introductions

Hello from sunny Hereford

(1/3) > >>

28ten:
First post and I am lying, it is still chucking it down here :bang:
What do I like to make? trains usually, but that's not why I am here. I own a C3 lathe (and hopefully a mill in the not too distant future) and after seeing bogstandards work on you tube, I thought I would join before I start to improve the machine, I shall start a thread on my experiences  :D

spuddevans:
Hi there 28ten and welcome to the collective  :borg:

Dont forget to take some photos of what you've done / are going to do, cause  :worthless:


We like pics here  :mmr:


Please feel free to share whatever experiences you have.


I have the smaller brother of the C3, the C2 but I wish I'd got a slightly bigger and more rigid lathe like the C4.



Tim

CrewCab:
Welcome aboard  :beer:

CC

Andy:
Welcome 28ten. Good decision, joining this board.  :mmr:
I've got a C3 as well, done most of the easy mods now.

Brass_Machine:
Welcome to the collective :borg:

I have the c2... wish I would have gotten the c3 or c4. Oh well! You should find plenty of info here about upgrading those machines (the mills too)

Lets see some pictures of the trains!

Eric

Navigation

[0] Message Index

[#] Next page