Gallery, Projects and General > Project Logs

Another Paddleducks build log

<< < (26/70) > >>

spuddevans:
I got a little more done today, started off by hacksawing a piece of 2mm brass for the baseplate, then sized it up on the mill. Then I slathered it with layout dye and marked it up.



Then it was over to the mill and I drilled all the 3mm holes and then all the 2.5mm holes, then I mounted the bearing blocks and marked up for the cutouts. Over to the mill again to mill out the cutouts.



The obligatory posed shot



Th-th-th-that's all folks ( for today anyway )

Tim

CrewCab:

--- Quote from: spuddevans on August 21, 2009, 12:11:12 PM ---The obligatory posed shot
--- End quote ---

Love it

Progressing nicely there Tim  :beer:

CC

chuck foster:
excellent build  :beer:

i was wondering were i can get the plans for this engine??

chuck  :wave:

NorthOf40:
Hi Chuck,

Bogstandard posted a couple links to his engine in this tread http://madmodder.net/index.php?topic=1261.0

chuck foster:
thanks jim  :beer:

chuck  :wave:

Navigation

[0] Message Index

[#] Next page

[*] Previous page