Gallery, Projects and General > Project Logs
Bogs Bitten By Bling Bug !!!
Stilldrillin:
Thanks John!
That`s given me several ideas....... :thumbup:
David D
bogstandard:
So, another hour or so in the shop this morning, getting bits and pieces roughed out and shaped.
Flywheel hubnut, plus a little bit of fine drilling to get the conrod looking slightly different.
This is how the flywheel and hubnut looks when assembled. The flywheel takes careful looking after because the spokes are only 0.030" (0.75mm) thick, and can easily be bent.
Not much to show for many hours work, but at least all the rough bits are done, except for that 'orrible looking square bit on the cylinder. That is going to get a real good dose of looking at, very soon.
I assembled all the bits and stuck 5 psi into it. What an anti climax, just started ticking over as merrily as could be, with no lube.
It will be getting a little on final assembly.
I have decided to go with the acrylic, just need to find the correct shape for it to be.
Bogs
raynerd:
looks pretty amazing... nice picture as well.
Bernd:
Out standing job Bog's.
Nice finish so far.
Bernd
Darren:
What happened to the competition element, who else could possibly be in the running....
Except Steve maybe, he might be able to give you a run...... :ddb:
Very nice indeed John..... :clap:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version