| Gallery, Projects and General > Gallery |
| My Attempt |
| << < (4/8) > >> |
| foozer:
--- Quote from: Bluechip on July 20, 2009, 09:43:19 AM --- --- Quote from: foozer on July 19, 2009, 06:32:14 PM --- --- Quote from: Bluechip on July 19, 2009, 04:48:56 PM --- Robert: Pics of yours then? I've bared my soul ... --- End quote --- Dood it just for you :) here --- End quote --- Foozer, you do your engine an injustice. That is a sweet little engine. Enchantingly exuberant !. I must treat mine to a flywheel shortly. Dave --- End quote --- That's funny. Know how I drilled the holes in the flywheel? You sitting down? Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley. --- Quote ---I'm retired. I really resent it now when I have to go to appointments --- End quote --- UPS is my friend now, if only burgers and fries were delivered. . . |
| rleete:
--- Quote from: foozer on July 20, 2009, 12:52:08 PM ---That's funny. Know how I drilled the holes in the flywheel? You sitting down? Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley. --- End quote --- That's innovative thinking! |
| DeereGuy:
The important thing is you made it. Nice job! |
| Bernd:
--- Quote from: foozer on July 20, 2009, 12:52:08 PM ---That's funny. Know how I drilled the holes in the flywheel? You sitting down? Used a 7 1/4 inch saw blade, made a little spud for the center, slipped the flywheel over it and counted off the teeth, all in a drill press. Stone ax and flint knives, right up my alley. --- End quote --- Another saw blade to use is a band saw blade. You can bbend those around a piece of wood and make an indexing device. Bernd |
| Stilldrillin:
Dave! Sorry Mate....... Only just seen this! :doh: Very nicely done! :clap: Re. bores/ boring. I`ve got lots of reamers which used to produce mirror finish holes from 10mm to 20mm. Let me know what size will be of use, next time.... :thumbup: David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |