Gallery, Projects and General > How do I??

Drilling around the circumference without RT

<< < (5/5)

raynerd:
Thanks for the verification - I`ll be giving it a go shortly and see how it works out! I have fitted my little X2 mill with the fignoogle DRO layout and so I`ll be using that - however they are only cheapo DRO bars so I`m not entirely sure how accurate it will be. I hope it is as accurate as a RT.... I`ll let you know how it goes.

Chris

NickG:
That's right 10/10!  :smart:

Stilldrillin:
I used trig/ pythagoras almost daily, up to retirement.

Those figures jumped out at me!  :bugeye:

They`re right!

You never forget...... Like riding a bike......  :thumbup:

David D

bogstandard:
Go to the downloads section here

http://madmodder.net/index.php?action=downloads;sa=view;down=3

1  Click on the program name and download it to your desktop.

2  Run it.

3  Choose Pitch circle diameter from the top menu.

4  Choose how many holes you want.

5  Select Imperial or Metric.

6  Put in the size of the circle in decimal, leave x and y centre coords as they are.

7  Press calculate.

Job done, 1 mins work.

Bogs

raynerd:
Thanks guys - it has been a while since I did Trig, back when I did my A levels! I`m glad I calculated it right..

Cheers for the link, John - usefull tool.

Navigation

[0] Message Index

[*] Previous page