| The Shop > CNC |
| My CNC Router |
| << < (6/6) |
| vtsteam:
:wack: A waste. I can achieve the same effect with a screwdriver bit. Basically it's a matter of applying high enough RPM at the start of the extraction process. I find I can use the same bit for this for thousands of screws. :thumbup: |
| vtsteam:
Well the Bosch Colt router bearings finally arrived after 14 days. I thought the order had gone astray from eReplacementParts dot com. Gee, whadya expect for $12 shipping for 2 small bearings that fit in a small envelope? Bearings were $12 so the shipping cost doubled the price. Next time I'll order the bearings elsewhere, now that I know what they are. One is a 6002rs, the other a 627zz. Both common and like $10 per 10, and 2 day free shipping from the big river company. The ones received were made in Maylasia, so not exactly Timkens. Even Timkens are $5 ea. Oh well! :dremel: [ You are not allowed to view attachments ] [ You are not allowed to view attachments ] |
| Navigation |
| Message Index |
| Previous page |