Author Topic: My CNC Router  (Read 5176 times)

Offline vtsteam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6808
  • Country: us
  • Republic of Vermont
Re: My CNC Router
« Reply #25 on: July 10, 2025, 10:27:36 AM »
 :wack:

A waste. I can achieve the same effect with a screwdriver bit. Basically it's a matter of applying high enough RPM at the start of the extraction process. I find I can use the same bit for this for thousands of screws.  :thumbup:
I love it when a Plan B comes together!
Steve
https://www.youtube.com/watch?v=4sDubB0-REg