Gallery, Projects and General > Project Logs
The Artful Bodger's nutating engine!
sbwhart:
Cracking job John :thumbup:
Well done
Stew
Brass_Machine:
Pretty cool John. Pictures described well enough I believe.
Eric
CrewCab:
--- Quote from: Bernd on July 22, 2009, 10:33:38 AM ---I like the way you riveted the flywheel to that shaft. :thumbup:
--- End quote ---
Now I've regained the plot :bow: ............... Nicely bodged Mr Hill :clap:
CC
John Hill:
Thank you for kind words! :med:
John Hill:
Progress is rather slow but a bit got done today!
These are the crank webs being drilled, a piece of angle iron from the junk pile was cleaned up on the shaper and made a nice angle bracket that I do not mind drilling holes in!
All the moving bits seem to fit together! There will be quite a bit of Loctite or super glue to hold it all together, silver solder would be ideal but I dont have the torch right now and besides I dont want to cook the bearing.
Next, finish the frame, mount the bits then make the inlet and exhaust ports!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version