| Gallery, Projects and General > Project Logs |
| The Artful Bodger's nutating engine! |
| << < (8/15) > >> |
| sbwhart:
Cracking job John :thumbup: Well done Stew |
| Brass_Machine:
Pretty cool John. Pictures described well enough I believe. Eric |
| CrewCab:
--- Quote from: Bernd on July 22, 2009, 10:33:38 AM ---I like the way you riveted the flywheel to that shaft. :thumbup: --- End quote --- Now I've regained the plot :bow: ............... Nicely bodged Mr Hill :clap: CC |
| John Hill:
Thank you for kind words! :med: |
| John Hill:
Progress is rather slow but a bit got done today! These are the crank webs being drilled, a piece of angle iron from the junk pile was cleaned up on the shaper and made a nice angle bracket that I do not mind drilling holes in! All the moving bits seem to fit together! There will be quite a bit of Loctite or super glue to hold it all together, silver solder would be ideal but I dont have the torch right now and besides I dont want to cook the bearing. Next, finish the frame, mount the bits then make the inlet and exhaust ports! |
| Navigation |
| Message Index |
| Next page |
| Previous page |