| The Craftmans Shop > Radio Control Models |
| 1/16 Scale RC Truck parts |
| << < (13/13) |
| ddmckee54:
--- Quote from: vtsteam on April 13, 2025, 12:21:18 PM ---what would I have to do for fun? :lol: --- End quote --- Steve, you could always do what I do and complain about the quality of the parts you're getting. As far as having a better idea of what I talking about, when I modify the pinion shafts and drive shafts I'll take some pictures and things should become a little more clear. Don |
| vtsteam:
cool! :beer: |
| ddmckee54:
I found that Lesu makes a driveshaft with a 40-45mm range. I initially had 37mm between the center axle and the rear axle. If I add 5mm to my center/rear axle spacing that will put me in the middle of the Lesu driveshaft's range. I did some checking, and the only 3D printed part that I really need to modify to do this is the equalizer beam. Eventually I will have to determine the hole sizes/locations for the frame rails, but that's a problem for future me. Don |
| Navigation |
| Message Index |
| Previous page |