| The Shop > Electronics & IC Programing |
| Pi PICO DRO/Quill-Knee combiner |
| << < (5/12) > >> |
| BillTodd:
Aha! fixed the font error by editing the font file . No more bouncing numbers . |
| AdeV:
Very nice! If you can implement the sliding woodworker's scale ( :lol: the inch fractional one), that would be the icing on the cake. But it looks like you already have a really nice functional DRO. |
| BillTodd:
That's today's project :lol: |
| philf:
--- Quote from: AdeV on January 31, 2024, 04:55:33 AM ---If you can implement the sliding woodworker's scale ( :lol: the inch fractional one), that would be the icing on the cake....... --- End quote --- Funnily enough I was thinking the same. I find it much easier to move to a value on a dial rather than via the DRO. (Not that I'd want fractions!) |
| BillTodd:
It's almost working . a couple of quirks to iron out but the PICO seems fast enough. Not the greatest video , but my camera battery went flat and i could not retake. The ghosting is a problem with the OLED display , I suspect the driver chip setting requires tuning (there are a few pre-charge and current settings to adjust) anyone have any experience? Shown are 64ths but any divisor can be used (works nicely at 1/16") &feature=youtu.be |
| Navigation |
| Message Index |
| Next page |
| Previous page |