| The Shop > Tools |
| Cutting a taper |
| << < (3/3) |
| Dell:
Finally figured it out instead of setting both axis to zero I set X axis to .25mm above zero then zero X axis cut taper and it leaves .5mm step. Dell |
| philf:
Dell, I'm pleased you have sorted it. I don't have an ELS but the instructions of yours aren't very intuitive. Phil. |
| Dell:
Finally got around to finishing the arbor for mounting diamond discs to the Pultra. Dell [ You are not allowed to view attachments ] [ You are not allowed to view attachments ] [ You are not allowed to view attachments ] |
| Navigation |
| Message Index |
| Previous page |