Author Topic: Enjomor Hit & Miss Running!  (Read 4623 times)

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 102
Enjomor Hit & Miss Running!
« on: August 01, 2023, 12:19:47 AM »
Enjomor Hit & Miss Running!

On a temporary board and needs some fine tuning, but running now…..thank you for your help 🙌




Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1258
  • Country: ca
Re: Enjomor Hit & Miss Running!
« Reply #1 on: August 01, 2023, 05:38:31 PM »
Very nice ! So why did you have no spark?

Offline Jim Dobson

  • Full Member
  • ***
  • Posts: 102
Re: Enjomor Hit & Miss Running!
« Reply #2 on: August 01, 2023, 05:41:57 PM »
Thanks Tom.

It was my fault :( working on the engine before ever starting it I took the governor apart and it is has a cam gear on the back and without thinking I just put it back any old way and forgot about it. So the XXX amount of times trying to get it started was never going to happen.
At least now that it is running I can start making adjustments to s-l-o-w it down.

 


 

Offline kered

  • Newbie
  • *
  • Posts: 3
Re: Enjomor Hit & Miss Running!
« Reply #3 on: September 19, 2023, 09:58:09 AM »
Sometimes, the excitement of working on engines can lead to a few oversights. Glad you figured it out. Now that it's running, tweaking it will be a breeze. Just remember, take it one step at a time and you'll have it purring perfectly!