The Shop > Tools
Carbide insert for ME threads
(1/1)
Xldevil:
Hello.
Can anyone recommend the correct 55°carbide insert to cut a 1/4 x 40 tpi ME thread?
To be clear, I am not looking for tap and die, I would like to cut the threads on my Myford.
Unfortunately I am to stupid to grind a hss tool myself.
Thank you for any help.
philf:
Hi,
I don't think you'll get a specific 40tpi insert that will cut a full profile and you'd have to go for a 55 degree partial profile insert:
https://www.shop-apt.co.uk/partial-profile-external-threading-inserts/16er-ag55-t350-external-threading-insert-for-general-use.html
These have a range of 8 - 48 tpi.
I hope you're not hoping to find insert to cut the internal thread!
Phil.
djc:
--- Quote from: philf on May 12, 2023, 03:25:12 AM ---I don't think you'll get a specific 40tpi insert that will cut a full profile
--- End quote ---
The insert designation would be 16ER 40W or 3ER 40W and there are at least two UK suppliers:
https://www.cromwell.co.uk/shop/cutting-tools/threading-inserts/16er-40-w-insert-grade-ic-508/p/ISC1215370G
(Zoro are likely to have an identical insert at a cheaper price)
https://www.ewequipment.co.uk/products/16er-40w-ptx-whitworth-55-external-right-hand-threading-insert-posithread
The catalogue of a typical insert manufacturer, e.g. Posithread, will give a reliable guide to availability:
https://posithread.co.uk/threadturningcatalogue.pdf
philf:
--- Quote from: djc on May 12, 2023, 11:32:43 AM ---
--- Quote from: philf on May 12, 2023, 03:25:12 AM ---I don't think you'll get a specific 40tpi insert that will cut a full profile
--- End quote ---
The insert designation would be 16ER 40W or 3ER 40W and there are at least two UK suppliers:
https://www.cromwell.co.uk/shop/cutting-tools/threading-inserts/16er-40-w-insert-grade-ic-508/p/ISC1215370G
(Zoro are likely to have an identical insert at a cheaper price)
https://www.ewequipment.co.uk/products/16er-40w-ptx-whitworth-55-external-right-hand-threading-insert-posithread
The catalogue of a typical insert manufacturer, e.g. Posithread, will give a reliable guide to availability:
https://posithread.co.uk/threadturningcatalogue.pdf
--- End quote ---
DJC - Happy to be proved wrong. :thumbup:
Cromwell don't have them in stock and the EWEquipment insert isn't cheap.
Xldevil:
Thank you very much for your help. :beer:
Navigation
[0] Message Index
Go to full version