| Gallery, Projects and General > Oooops! |
| Spot the mistake |
| (1/1) |
| Dell:
I have been getting used to using my new to me lathe , I had already made a mount so I can use the graver, and I thought next I would make a carriage stop but it needed to be a stop and a mount for the dial gauge well I was chuffed that what I had made was going to do the job until I fitted the dti :doh: the carriage hits the mount before the full travel of the dti , so a slight modification is needed. Dell [ You are not allowed to view attachments ] [ You are not allowed to view attachments ] [ You are not allowed to view attachments ] |
| awemawson:
He who's never made a mistake has never made anything ! . . . . it's all a learning exercise :thumbup: |
| AdeV:
Could you make an extension for the DI plunger? Might be the easiest fix... |
| Dell:
Yes AdeV That was my thinking as extended pointers are freely available, although I could make one. |
| krv3000:
hi a job well dune just make a extension regards bob |
| Navigation |
| Message Index |