Gallery, Projects and General > The Design Shop
Small Press to fit in a Tiny shop?
tom osselton:
--- Quote from: vtsteam on June 18, 2022, 10:39:31 AM ---Enlargement of the ad......ad says two 7" x 1-3/4" x 3/4" blocks are supplied......wonder why the blocks appear to be serrated?
Also, the ad shows the end of the bearing with a tapered end. Mine is shorter, no taper. I wonder if someone cut the taper off because they were regularly pressing something wider.:
--- End quote ---
I think that is just the picture after looking at the other edges in the pic.
vtsteam:
I don't know, Tom. I think I see threads on the screw, and they are even smaller. Not sure.........maybe there's some reason for it.
I was able to paint the press today and now it seems like a real tool! :dremel:
RussellT:
That looks good Steve. I wish that when I wanted a new tool I could wander out to the scrap pile and find what i wanted. Now we need to see it doing some work.
Andrew mentioned the picture problem again, and although this has been raised several times I don't think anyone has given a solution.
I don't think this problem is confined to Chrome. The problem is that mixed (secure and insecure) content is blocked on most browsers including Edge and Firefox.
This is the solution for Chrome:-
Click the lock (caution) icon, then click Site settings.
Scroll to Insecure content, then use the drop-down list to change “Block (default)” to “Allow.”
Reload the page.
The solution for Edge is the same except that Site settings is called "Permissions for this site".
I don't have Firefox but a search for "enable mixed content in Firefox" should help.
Russell
vtsteam:
Thanks Russell, That's excellent information. I use a Mozilla based browser, similar to Firefox and is easily set to allow mixed source material. I had heard Chrome had blocked non-certificated sources entirely, but good to know it is alterable. A fair amount of historic photo content on this (and other) sites is mixed content, and it would be good for others to actually view it, if they choose.
I'd like to post your note where others can see it as well, in case they can use it.
As for trying out the press -- I'll have to think of something........... !
shipto:
Is it just the pictures or are the two top channels bent up a little?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version