Home Base > Introductions |
myford ML7 reborne |
<< < (3/4) > >> |
anday:
Hi to answer other questions ...for my sins, I was a printer of labels, and one of the reasons I like engineering is that my 1st boss was really an engineer and brought some pretty old kit that needed a lot of maintenance. many thanks for the offer on the tool post. I bought the manual (expensive) but useful from myford thanks for the picture advice it worked I will post up pics when I finally finish it hopefully next week. if any one has some drawings for a beginner project that wold be great many thanks andrew many thanks |
vtsteam:
One of the first things I made for both my Gingery lathe and my Craftsman 12" was a quick change tool post and a bunch of holders. The Drummond type toolpost and holders are possible to make entirely on a lathe, without a milling machine. The post is a 1.25" dia (or similar convenient metric size) piece of cold rolled rod, drilled through axially to take a fastening bolt to attach to your slide. The holders can be made via either a 4 jaw chuck or a faceplate. The tool holder's tool slot can be made using the toolpost itself by holding a milling cutter (slot drill) in the headstock, and milling the toolholder while clamped to the toolpost. Here's a blast from the past thread I did when I first started equipping the Craftsman. BTW the same toolholders fit both the Gingery and Craftsman because I standardized on a 1.25" post. I've never regretted making these! Thread here: https://www.madmodder.net/index.php/topic,8415.0.html Below: The toolpost mounted with a tool holder, and a bunch of blanks to be made into more holders to fit. |
jiihoo:
Now that is one nice looking hammer! Quality work. Cheers, Jari |
anday:
great job i'll give that a go I managed to finish lath final pic..proud dad lol |
anday:
DRO fitted |
Navigation |
Message Index |
Next page |
Previous page |