| Gallery, Projects and General > Neat Stuff |
| Collet identity Question |
| (1/1) |
| vintageandclassicrepairs:
Hi All, Yet another gifted items was this collet set, from 1/4in. to 5/8in. (missing 1/2in. one) The draw bolt thread is 5/8in. UNF and overall length is about 2 3/16in. Also included was this 5C collet I do not have any use for these as my mill uses DA180 collets so they are available John |
| Kjelle:
I haven't the slightest idea, but in my bookmarks, I have this page; http://www.tools-n-gizmos.com/specs.html There are more than these out there of course, but short of going into Practical machinist, and asking there, it's a good starting point. Kjelle |
| chipenter:
3C ,4C and 5C have external threads as well as internal . |
| mc:
They look homemade. Possibly 5C collets (without external thread) for a milling machine? |
| Navigation |
| Message Index |