Gallery, Projects and General > Project Logs
rotary table D1-4 reciever
Bernd:
Ok, I'm convinced. (I don't think you've done any work with them :lol: ) They still look great.
Bernd
ieezitin:
What a great mod.
Great looking piece of equipment and shows quite nicely the benefits of anodizing. And by what I have read here it’s not that unachievable for most of us in our hobby shops.
Bob thank you for showing us. Anthony.
DeereGuy:
Bernd thanks!
Anthony,
I have changed a lot of things since I first tried this myself last June. I am now using a CC powersupply, commercial black dye, and nickle acetate for sealing. The black part was anodized at 12 ASF and the tank temp was 75 - 78 degrees. My tank mix is 1:1 Napa Battery acid to distilled water (5 gallons total).
NickG:
Bob, quite right anodising is a great surface protection. We use it at work for components that have to be stored / used in extreme conditions. We put stuff through salt spray tests and it holds up really well.
Nice work there, Nick
DeereGuy:
Thanks Nick,
It's been a real learning experience. I am thinking about adding a small chiller for the 5 gallon tank. Now that I am shooting for 12 to 15 ASF it will be harder to keep the tank cool this summer.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version