Gallery, Projects and General > Project Logs

Custom designed Video Light Project

<< < (2/2)

spuddevans:
Well I haven't given up on this (yet  :lol: ), just had a busy month and a lot of prototypes being made/re-made/re-made again......

Finally got some progress to show, here are the latest updates.

So we start off by comparing the PCB we finished in Part 2 with one of my old video lights. I have 3d-printed a bunch of parts to make a Panel-type video light measuring about 240mm high by about 380mm wide. This will contain 6 of the PCB's that were shown in the last video. This video we show the parts and how they fit together.




Then we assemble the parts and glue them together with some slightly-dodgy superglue (took ages to set)




Then it was simply a case of wiring the modules together and then testing it out by comparing the LUX output of it to my previous video lights.




There will be further parts to come, but not for a while, feeling the call to get back to some other projects 1st!!!

Thanks for watching
Tim

Navigation

[0] Message Index

[*] Previous page