Author Topic: Quiet around here  (Read 2501 times)

Offline russ57

  • Sr. Member
  • ****
  • Posts: 278
Quiet around here
« on: July 22, 2021, 09:57:41 PM »
Are you all still out celebrating your 'freedom day'?
Not been much activity recently.

(quiet and cold here, with most of the population in some sort of lockdown, and a cold winter to boot).



-russ


Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8966
  • Country: gb
  • East Sussex, UK
Re: Quiet around here
« Reply #1 on: July 23, 2021, 02:26:49 AM »
Not been in the workshop much recently as I have no major project on the way. Anyway it’s been unbearably hot in there for the last few days.
Andrew Mawson
East Sussex

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1255
  • Country: ca
Re: Quiet around here
« Reply #2 on: July 23, 2021, 06:08:12 PM »
I’m waiting for a viewing for a Microcut 1440 fully loaded from what I hear the fellow isn’t in good health as he battles the big C so I’ll be glad to help him out and give him one less thing to worry about.

Offline russ57

  • Sr. Member
  • ****
  • Posts: 278
Re: Quiet around here
« Reply #3 on: July 24, 2021, 11:50:39 PM »
Im nearly finished the replacement of the vfd on my mill following the demise of the first.
This time i really had to build a proper external control as the built in controls are microscopic..
Its only been 3 years, but apparently i need to reform the filter caps before loading it.



-russ