Author Topic: 3d printed clock for model railway  (Read 7964 times)

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 1106
  • Country: 00
  • Colchester Essex (where the lathes were made)
3d printed clock for model railway
« on: April 22, 2021, 12:36:08 PM »
3 years ago I designed a model clock for a friend's model railway. The idea was for a set of clocks that could show model time .

I opted for a cycloidal gear reduction based on  a design  by a chap here at madmodder.

I used the works expensive Objet printer to make the parts then got distracted....

The other day i found the parts again and finally put then together:


Offline awemawson

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8972
  • Country: gb
  • East Sussex, UK
Re: 3d printed clock for model railway
« Reply #1 on: April 22, 2021, 02:58:15 PM »
Very neat Bill  :thumbup:
Andrew Mawson
East Sussex