The Shop > Our Shop
My easy solution to No More Clogged Spray Paint Rattle Cans
(1/2) > >>
Jim Dobson:
My easy solution to No More Clogged Spray Paint Rattle Cans

vtsteam:
ie. use some thinner and compressed air to clear a paint can nozzle after spraying. 

btw turps or mineral spirits will not thin lacquer based spray paints (like Krylon). A lacquer solvent will clear those.
Pete49:
My problem is lack of air in the can. I have a couple nearly full cans but no propellant.  :doh:
Jim Dobson:

--- Quote from: Pete49 on March 29, 2021, 09:54:58 PM ---My problem is lack of air in the can. I have a couple nearly full cans but no propellant.  :doh:

--- End quote ---

That's what I used to end up with from up ending the cans and spraying clear propellent out of the nozzle to clear them like it says on the can to do, because I use them a lot for small parts I always ended up with paint in the cans and no propellent to spray it!
efrench:
How effective would just using compressed air be?
Navigation
Message Index
Next page

Go to full version