| The Craftmans Shop > New from Old |
| Tidying Up An Analoy 1401 Alloy Analyser |
| << < (13/18) > >> |
| vtsteam:
What about splitting them into smaller parts? I can split and join pdfs in Puppy Linux if wanted -- though probably you can do that also, I'm guessing. |
| awemawson:
I've put them on Dropbox - not done this in years so I hope that it works ! https://www.dropbox.com/sh/heimzy8kohwzjda/AAAfKloCUFZG_Zixewy7z43Ha?dl=0https://www.dropbox.com/sh/heimzy8kohwzjda/AAAfKloCUFZG_Zixewy7z43Ha?dl=0 See if you can do anything with that Steve (I'm not sure how long the link and files stay valid - presumably they must expire some time or Dropbox would over fill :scratch: ) |
| vtsteam:
Okay, will give it a try. Part 1 of Circuits attached...... |
| vtsteam:
Hmmm worked. Don't know if I can attach more than one per post. Will try here...... |
| vtsteam:
Well....that worked. Okay.... in the two posts above, that's Circuits, parts 1 & 2 and the Manual parts 1,2, & 3. :beer: |
| Navigation |
| Message Index |
| Next page |
| Previous page |