Gallery, Projects and General > Project Logs

Worden grinder

(1/3) > >>

John Rudd:
Here's a photo of some of the parts of my Worden I've been building.......the troublesome plate that needed some drawing help... :lol:

On the left the end mill sharpening jig, the right, the slit saw jig.

John Rudd:
I deviated slightly from the plans.....as you do.

On the slit saw jig, it calls for the hole in the main block to be 11/32" to match the bush on the main body.
I decided to make a bush slightly smaller, so all I had to do was unscrew the end mill block with its threaded bush and screw on the slit saw assy.

After completion, I though about what I'd done....not necessarily a good idea....wear on the feed screw?

vtsteam:
Great to see this in the flesh, John! :dremel: :thumbup:

John Rudd:
I'll take some snaps of the rest of the grinder once the rain stops!( I'll get wet going to the garage... :doh: 😂🌂🌂🌧🌧☔️☔️ )

Spurry:

--- Quote from: John Rudd on January 19, 2021, 11:48:25 AM ---I'll take some snaps of the rest of the grinder once the rain stops!( I'll get wet going to the garage... :doh: 😂🌂🌂🌧🌧☔️☔️ )

--- End quote ---

Hope you don't need a snorkel....

Navigation

[0] Message Index

[#] Next page