| Gallery, Projects and General > Project Logs |
| Worden grinder |
| (1/3) > >> |
| John Rudd:
Here's a photo of some of the parts of my Worden I've been building.......the troublesome plate that needed some drawing help... :lol: On the left the end mill sharpening jig, the right, the slit saw jig. |
| John Rudd:
I deviated slightly from the plans.....as you do. On the slit saw jig, it calls for the hole in the main block to be 11/32" to match the bush on the main body. I decided to make a bush slightly smaller, so all I had to do was unscrew the end mill block with its threaded bush and screw on the slit saw assy. After completion, I though about what I'd done....not necessarily a good idea....wear on the feed screw? |
| vtsteam:
Great to see this in the flesh, John! :dremel: :thumbup: |
| John Rudd:
I'll take some snaps of the rest of the grinder once the rain stops!( I'll get wet going to the garage... :doh: 😂🌂🌂🌧🌧☔️☔️ ) |
| Spurry:
--- Quote from: John Rudd on January 19, 2021, 11:48:25 AM ---I'll take some snaps of the rest of the grinder once the rain stops!( I'll get wet going to the garage... :doh: 😂🌂🌂🌧🌧☔️☔️ ) --- End quote --- Hope you don't need a snorkel.... |
| Navigation |
| Message Index |
| Next page |