| Home Base > Introductions |
| kankarrio |
| (1/1) |
| kankarrio:
Greetings to all from Spain I apologize for my English, I use a translator searching the web http://pandora-cnc.eu/ cnc system information ddcsv has directed me to this forum I feel that because of the language I will not be very active, I have been looking to resolve doubts about the ddcsv In Spain I am very active in the http://forometalaficion.com/foro/ thanks to everyone |
| Brass_Machine:
Hi and welcome! No apologies needed. You aren't the first to use a translator to join discussions. We will make do! Eric |
| ddmckee54:
kankarrio: Welcome to the forum. Your English would not be any worse than my Spanish, because I would have to use a translator just like you. Earlier this year I bought a DDCSV for use in a CNC router that I am building. I cannot tell you how it is working because I have not been working on that project for a while, I really need to get back to work on it. There is a thread on this forum about the DDCSV that spans several years, and after talking with them I have high hopes for my project. Let us know how yours works out. Don |
| WeldingRod:
Welcome aboard! My DDCSV runs my cnc router successfully. I really need to update the firmware; there is mistake in one direction of circular interpolation. I do my gcode processing with short segments rather than true curves. Sent from my SM-G892A using Tapatalk |
| kankarrio:
thanks to everyone Weldingrod I had the same problem in my ddcsv2.1 and I changed a parameter in the aspire and it was solved |
| Navigation |
| Message Index |