The Craftmans Shop > New from Old
Trying to Quieten the 110KVA Generator
awemawson:
Oh yes !
russ57:
Are you sure it's not just a padded cell....
-russ
AdeV:
--- Quote from: russ57 on October 20, 2020, 03:08:14 AM ---Are you sure it's not just a padded cell....
--- End quote ---
A padded cell with a honking great diesel engine in it! Luxury! :lol:
awemawson:
It does sound very peculiar in there when the Generator is not running, and if your ear is within about a foot of the wall it’s even stranger :clap:
All that disappears though when the engine starts !
I thought that I had thinking time before the ceiling mesh is delivered, but Brundels have email to say it’s coming today :bugeye:
awemawson:
True to their promise, Brundles have just delivered a bankrupting load of steel to me :bugeye:
The six 50 x 50 x 2400 x 1220 galvanised mesh panels to hold the ceiling acoustic material up, but also . .
Three off 6 mm x 100 mm x 6 metre mild steel bars and . .
Two off 25 mm x 25 mm x 3 mm x 6 metres angles
. . .to make Copes and Drags for the Foundry - but more of that later in an another thread probably.
Meanwhile I feel singularly disinclined to start fixing the mesh, and anyway first I need to reduce the three light fittings to dangling cables in order to get the mesh up (lights will fix up under the mesh)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version