The Craftmans Shop > New from Old
Trying to Quieten the 110KVA Generator
awemawson:
All done (hopefully!) now Matthew.
So I've just fitted the exhaust stack and proved that the generator opens it OK - which it does :thumbup:
awemawson:
My long series 5 mm drills came this morning, so while a friend was entertaining puppy I managed to cut and fix panel #6 and complete the fixing of panel #5
Annoyingly, when I'd carefully cut panel #6 to height and cut round the RSJ and fixed it in place, I found that it was only 35 inches wide, unlike the rest that are a 1 metre coverage. It doesn't really matter except that I now have 4 inches of angle iron sticking out at the end of the wall. I'll probably cut it off with an angle grinder at some stage.
modeng200023:
Don't forget to instal some lighting in the generator room.
John
awemawson:
Yes John my friend the ex-fireman keeps nagging me about that :clap:
The only lighting originally in the stable are two halogen PIRs, one of which will be in the "generator room" but long term I will put some LED floodlights, both for the Generator and also for the rest of the stable.
kayzed1:
Do you have a drain hole in the elbow o/s to drain the stack?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version