Author Topic: camlock back plate  (Read 2515 times)

Offline celsoari

  • Full Member
  • ***
  • Posts: 132
  • Country: br
camlock back plate
« on: February 17, 2020, 03:49:26 PM »
my lathe has a camlock type, in this video I demonstrate how I built a camlock back plate:

o meu torno tem um encaixe do tipo camlock, neste video demonstro como eu construi uma flange camlock para uma placa autocentrante de 4 castanhas:



cheers
Celso Ari
Greetings from Brazil

Offline philf

  • Hero Member
  • *****
  • Posts: 1107
  • Country: gb
Re: camlock back plate
« Reply #1 on: February 17, 2020, 05:35:26 PM »
Very nice Celso Ari!
Phil Fern
Location: Marple, Cheshire

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 463
  • Country: at
Re: camlock back plate
« Reply #2 on: February 18, 2020, 02:39:55 AM »
Good work. Thanks for sharing it.
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline GordonL

  • Jr. Member
  • **
  • Posts: 26
Re: camlock back plate
« Reply #3 on: February 18, 2020, 08:08:52 AM »
Looks good. I do question the wisdom of wearing sandals in the shop. Some of those chips are hot and sharp.

Offline celsoari

  • Full Member
  • ***
  • Posts: 132
  • Country: br
Re: camlock back plate
« Reply #4 on: February 18, 2020, 12:45:25 PM »
Very nice Celso Ari!

Good work. Thanks for sharing it.

thanks Bros...greetings from Brazil
Celso Ari
Greetings from Brazil