By a bit of jiggling with various pallets of 'stuff' to make room I realised that I could move the cage over the rough concrete in the 'stable' with the Forklift whereas the pallet truck would not have made it with this weight on board being pulled by hand.
So I was able to drop the cage on the smoother concrete running down from the foundry roller shutter door, and having already placed the pallet truck there (otherwise it wouldn't pass the cage!) pull it up to next to where it will finally live.
A bit of judicious tilting onto blocks while my wife pulled the pallet way from under got it down to ground level ready for cladding. But that will have to wait - it's far too close to uncured concrete - just too easy in a moment of drifting concentration to place my foot in it
![:clap:](https://madmodder.net/Smileys/default/happy0065.gif)
Still at least now it's nearly where it will eventually stay
![:thumbup:](https://madmodder.net/Smileys/default/happy0034.gif)