Author Topic: foundry work - aluminum pulley  (Read 1103 times)

Offline celsoari

  • Full Member
  • ***
  • Posts: 121
  • Country: br
foundry work - aluminum pulley
« on: February 01, 2020, 11:01:49 AM »
Step by step how I build an aluminum pulley



Greetings from Brazil


Celso Ari
Greetings from Brazil

Offline tom osselton

  • Hero Member
  • *****
  • Posts: 1117
  • Country: ca
Re: foundry work - aluminum pulley
« Reply #1 on: February 01, 2020, 07:16:28 PM »
 :thumbup:

Offline SwarfnStuff

  • Hero Member
  • *****
  • Posts: 564
  • Country: au
Re: foundry work - aluminum pulley
« Reply #2 on: February 01, 2020, 11:05:14 PM »
Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B   :thumbup: :med:
Converting good metal into swarf sometimes ending up with something useful. ;-)

Offline celsoari

  • Full Member
  • ***
  • Posts: 121
  • Country: br
Re: foundry work - aluminum pulley
« Reply #3 on: February 02, 2020, 11:10:06 AM »
Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B   :thumbup: :med:

:thumbup:

thanks Bros,  greetings from Brazil
Greetings from Brazil

Offline shipto

  • Hero Member
  • *****
  • Posts: 691
  • Country: gb
  • Redditch, UK
Re: foundry work - aluminum pulley
« Reply #4 on: February 09, 2020, 05:20:16 PM »
Very good although I did shudder a little at your bandsaw use  :bugeye:
Turns out this life c**p is just one big distraction from death but a good one. For the love of god dont give yourself time to think.
https://myshedblog.wordpress.com/

Offline celsoari

  • Full Member
  • ***
  • Posts: 121
  • Country: br
Re: foundry work - aluminum pulley
« Reply #5 on: February 17, 2020, 03:39:52 PM »
Very good although I did shudder a little at your bandsaw use  :bugeye:
Thanks Bro
Greetings from Brazil