| Gallery, Projects and General > Neat Stuff |
| How-to: X2 Mini Mill Torque and Speed increase |
| << < (5/6) > >> |
| j.bain87:
To NorthOf40, sorry for the delay, if you could try - j.bain87@yahoo.com - it would be appreciated. regards John. |
| Stilldrillin:
Did I read somewhere, the Conquest bearings are the same set, both for mill & lathe? :scratch: ie. The lathe taper bearings (30206) fit the mill...... :thumbup: David D |
| John Rudd:
I can confirm that the original 6206 bearings fitted to my minimill have the following dimensions: ID 30 OD 62 Depth 16 All dims in mm. Equivalent Taper brgs are SKF 30206 Dimensions are: ID 30 OD 62 Depth 17.5 I have these fitted to my Chester Conquest mill, the version I have is not the current version they sell but is similar to the Warco minimill. Hope this helps John |
| NorthOf40:
--- Quote from: j.bain87 on July 01, 2009, 02:24:50 AM ---To NorthOf40, sorry for the delay, if you could try - j.bain87@yahoo.com - it would be appreciated. regards John. --- End quote --- On the way :thumbup: |
| j.bain87:
Arrived safely, thank you very much NorthOf40. |
| Navigation |
| Message Index |
| Next page |
| Previous page |