Author Topic: APE MICROBALL Height Gauge  (Read 952 times)

Offline HalifaxHerbert

  • Jr. Member
  • **
  • Posts: 29
  • Country: gb
  • Owning an EDGWICK Mk1 does this to you.
« on: November 27, 2019, 06:41:59 AM »

I have a 23" APE Micro ball height gauge where the locking mechanism is becoming very stiff.
Does any member know how to strip the locking mechanism down so that I can clean and lubricate it.
The locking knob collar has two dimples spaced 90 deg. apart.
Not sure if these dimples are cap screw covers.
I don't want to replace the gauge because its like new.

Any info on this matter would be very much appreciated.