The Shop > CNC
First 3d printer - Ender 3 pro
Brass_Machine:
--- Quote from: Pete. on December 12, 2019, 02:30:49 PM ---I'll have a look at Thingiverse Eric. Don't want to hammer your bandwidth by attaching 20mb of files.
--- End quote ---
No worries. I think at both places you can set it up so people can 'tip' you when they download.
Eric
Pete.:
Hey all,
My Balzer working model is live on Thingiverse:
https://www.thingiverse.com/thing:4043256
chipenter:
Thanks Pete I will try and make this in steal , I use the ureka in my mill and it is very slow , this design looks smother and more controllable .
Pete.:
Form relieving is very slow regardless. I had thought a couple of times to build a proper working version but I didn't want to invest the time into making the split-DP gear several times to find a working combination. the printer makes that much easier.
Also this tool will ONLY produce 15-tooth cutters, unless you find some combination of gears that will offer a different advancement to the 60/4 teeth. I'll have a think about that.
Perhaps printed gears with 100% fill would be strong enough for a working machine? I shall investigate that...
mattinker:
Pete,
an interesting ambitious "first" print! I don't understand how it works, but I'm impressed!
Cheers, Matthew
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version