The Shop > CNC

Manual tool change help ddcsv

(1/1)

tonyho810:
Hi,

Can anyone help please. I'm trying to do a manual tool change on my home made router driven by ddcsv2.1. I'm using Fusion360 and trying various post processors.  As far as I can work it out the post inserts M06 in the code and the ddcsv goes off and runs the t.nc macro. Is that correct? I'm stuck with the t.nc macro, what do i put in it? If someone has already generated on could you share it please? I put a post on the official forum but no response.

Thanks,

Tony

Will_D:
Please read this:

Will_D:
I should include more about T.nc in that file, but here is what it contains:

G04P0
M110
G91 G92 Z#[767+#592]-#[767+#593]
#592 = #593

Hope this helps

Will

Will_D:
There is also a Facebook group that is pretty responsive

https://www.facebook.com/groups/1724999967517167

Here you will in the files section the latest user manual and a version description document as well as other useful stuff

Will

tonyho810:
Thanks Will,

I rememered in the middle of the night that  unix is case sensitive and I had been using t.nc instead of T.nc. That combined with the code you posted will fix it I'm sure

Thanks again,

Tony

Navigation

[0] Message Index