Author Topic: If you have a few days to waste  (Read 3845 times)

bogstandard

  • Guest
If you have a few days to waste
« on: June 06, 2009, 07:39:03 PM »
Going thru my engineering favourites I found this site that I haven't visited for quite a while.

I don't think this link has been shown on here before, so just enjoy.

http://www.homemetalshopclub.org/news/topics.html

This link takes you to the topics on the site, but if you go to the home page there is more.

There are machining projects and techniques galore, and you will soon fill up your notebook with things you can't live without, and cost very little to make. Plus some of the techniques just might solve one of those sticky problems you sometimes come across.

Bogs

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: If you have a few days to waste
« Reply #1 on: June 07, 2009, 03:41:09 AM »
Some good stuff there John....

Thank you!  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!