The Shop > Our Shop

My workshop tour

<< < (3/3)

hermetic:
Yes pekka, that was what I was going to do, I am pretty sure that the generator is working, but I don't think it has enough output to operate the bigger cut out that the tractor is fitted with, I will have one more try with it, then it will get an alternator, I have one off a Volvo that only needs a diode pack, could be the one!

PekkaNF:
Re_ Tractor not changing: engine rpm was 1/3 of car engine ....needed smaller plley than DC generator had and still would not charge on idle. Also changed the belt to cogged to work better on small pulley.

hermetic:
very good point Pekka!Q I will check on that, Thanks!
Phil

PekkaNF:
You are wellcome.

Found this old thread:
https://madmodder.net/index.php/topic,11049.msg128260.html#msg128260

Pekka

hermetic:
Very Interesting Pekka!  I can see me making one of those pulleys in the nearish future! I just put up my latest video about some more in depth looks at the projects in my workshop, enjoy guys!

https://www.youtube.com/watch?v=8lmuHYA5clI

https://www.youtube.com/channel/UCKf0nWnXKXltBjj7MWtdjWA?

Phil
East Yorkshire
UK

Navigation

[0] Message Index

[*] Previous page