Author Topic: DDCSV 4 axis not starting job  (Read 2997 times)

Offline tonyho810

  • Newbie
  • *
  • Posts: 3
DDCSV 4 axis not starting job
« on: July 23, 2019, 06:14:11 AM »
This is my first post and I hope it will save someone some stress in the future and payback for some of the stuff I have learned from my lurking here.

I have a newly built machine with a 4 axis controller. I thought everything was set correctly all switches working but when I tried to run a program it just sat there. It was a limit switch for the non existent A axis. I disabled it and off we go!