The Craftmans Shop > New from Old

Yet another Beaver resurection (TC20F)

<< < (10/10)

JeffK:
Thanks Andrew  :thumbup:

chipenter:
Do you have a G20 line before it locks up , if its default is G21 the feed will be 0.01 mm a minuet , a bit like watching a clock .

JeffK:
Sorry for the delayed reply - I was called away for a couple of weeks.
I have tried adding a G20 to the code but no difference. Checked the wiring and all seems good.
I think the answer must lie with parameters somewhere but just can't find the right one. At one stage
the diagnostic code 1000 showed a 1 on bit 3 which indicates an interlock or the start lock is on but
that has since stopped coming up. The status display on the bottom of the screen indicates that the
turret is moving but the position display shows no movement and the turret doesn't actually move.
More head scratching I think..... :scratch:

cheers

Jeff

Navigation

[0] Message Index

[*] Previous page