| Gallery, Projects and General > Project Logs |
| Slightly scary machining |
| (1/5) > >> |
| WeldingRod:
I scored a facing head on that auction site... who could resist the Copper control ring! I tried it out tonight. It works! Sent from my SAMSUNG-SM-G891A using Tapatalk |
| SwarfnStuff:
Well, that sure is different. (To me anyway) Guess your finish comes with practice on using the copper / brass ring thing? OH and you are correct in the scary bit. Not sure I would like my fingers close to that gizmo. Thanks for showing, John B |
| Doc:
Have never seen any like that but have used a Wolhhaupter which is very capable of doing that plus tappers and facing the bottoms of holes. |
| Mike E.:
I would think that the tool was not designed to be used in a mill, but for milling in a lathe; where the material is rotating in the chuck, and the tool is manually operated in the tailstock. |
| seadog:
Have you never seen a taper boring head? It's adjusted in exactly the same way. &ab_channel=jack |
| Navigation |
| Message Index |
| Next page |